ECOFIRE VP FLAME CONTROL 25 kW
PRODUCT DETAILS
Ecofire VP air heater is a modern device designed to heat halls, workshops, storage rooms, churches or greenhouses. It is used to transfer hot air in cereal, herbs and wood drying rooms or livestock buildings.The device is designed to work with E1 burner (power of 24kW), produced by ECOVARM for a couple of years, designed to burn wood pellets. The air heater enables air heating in rooms with capacity of 500 to 5000 m3.
The advantages of the device are:
- automatic ignition (even during a power failure), work due to the weekly planned working cycle
- handy controller, heater power gradation, cooperation with thermostat allowing to adjust the temperature inside the heated room
- high efficiency of tube heat exchanger, easy access to the combustion tubes what allows cleaning
- high combustion chamber, small amount of ash, long intervals between cleanings
- possible outlet of the heated air from the left or right side of the heater
- low cost of installation and use, no risk of freezing of the system
Power | kW | 25 |
Weight | kg | 280 |
Height | mm | 1850 |
Width | mm | 620 |
Depth | mm | 1010 |
Flue | mm | 130 |
Hot air outlet | mm | 310 |
Warm air temperature | °C | 45 – 60 |
Warm air amount | m3/h | 1400 |
Exhaust fumes temperature | °C | 140-180 |
Supply voltage | V | 230 |
Max. power consumption | W | 980 |
Efficiency | % | 90 |
The air heater burner should be supplied with pellets according to the DIN plus norm. Heating using wood pellets as an energy source is economically beneficial. Energy is obtained without doing harm to environment in contrast to the fuels such as coal, oil or natural gas. It is very popular among craftsmen, farmers or breeders.