ECOFIRE E1 is one of the most popular European pellet burners with thousands of pieces sold. ECOFIRE E1 is so designed to have a long service life and low operating costs. The ECOFIRE E1 has the horizontal hearth and owing to that it can be practically installed in every boiler, also in gas or oil one... ECOVARM has been manufacturing and selling the ECOFIRE brand burners for over 10 years.
The ECOFIRE E1 pellet burner normally starts up at a low power level. Then it automatically switches to higher power when the heat demand increases. The ECOFIRE E1 pellet burner feeds in small pellet doses at short intervals to ensure a consistent flame and a very high level of efficiency.
ECOFIRE E1 has a unique function that automatically senses if the heat requirement has increased. The ECOFIRE E1 pellet burner has the automatic ignition system including the ceramic heater and optical flame detector. The burner starts up quickly when heat is needed and it shuts off automatically when a building and water is heated. The ECOFIRE E1 pellet burner is equipped with the regulator and graphic display ensuring simple and comfortable operation. It controls the boiler operation, boiler or central heating circulation pump and a hot water heater or buffer tank loading. It can also be operated with a room thermostat. The burner operation and its use comfort can be compared with oil burner operation.
The ECOFIRE E1 burner has been tested and approved by DBI Gastechnologisches Institute in Dresden, Germany and achieved excellent results. The burner installed in the boiler can achieve efficiency of over 94%.
Fast and economic ignition with the ceramic igniter eliminates the risk of flue gases collecting in the boiler and igniting with explosive force (a problem with some pellet burners). The flame builds up gently and in stages. Temperature in the burner and drop tube is checked and the flame is monitored by a photocell.
The burner design ensures many years of operation owing to the use of high quality heat resistant chromium steel sheet. The ECOFIRE E1 burner is equipped with the automatic ignition system including the high-temperature resistant ceramic element that is covered by the warranty for 10 000 ignition cycles.
The Ecofire E1 burner has the horizontal hearth and owing to that it can be practically installed in every boiler, also in gas or oil one. The burner is delivered with the regulator controlling the operation of both the burner and heating system.
- High efficiency >94%
- Automatic pellet ignition
- Feeder for introducing pellet into the hearth and removing ash
- Robust design made of 4 mm thick heat-resistant sheet
- Regulator with graphic display
- Central heating and hot water circulation pump control
- Automatic start after supply voltage failure